What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 03:42

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
(Dc diagram shown, AC is similar).
I post the exact comment here.
so, what happens?
This is 'the assistant's answer'
This is where the MOV conducts again, and dissipated the energy.
He then describes the function of a fuse.
the problem then depends on "how fast does the fuse operate?".
˗ˋˏ ♡ ˎˊ˗ NEW WOMAN - analysis ˗ˋˏ ♡ ˎˊ˗
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
But… the neutral is now “floating” because of the 1 ohm resistance.
nine
He then asserts :
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
[image of Common-mode choke]
What is the meaning of xx in texting?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Astronauts track huge dust clouds over Canada and US | On the ISS this week June 2-6, 2025 - Space
[old diagram got deleted by accident]
Now when you have a certain ac resistance, then a current flows in a loop.
A fuse is a non-resetable over current circuit protector.
Where's Marty McFly's guitar? Search is on for 'Back to the Future' prop 4 decades later - NBC News
An AC voltage/ current source, and an ac inductive load.
Barnstars:
The third is lightning and “how it gets conducted into a home.”
The MOV will conduct when the voltage exceeds 50% of line voltage.
In schematic diagrams this is the symbol for a fuse:
One
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
what exactly is a ‘surge’ protector?
2024–10–14 [Omar Gharbi Omar Gharbi ]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Edit 2024–10.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
A circuit breaker is similar, but is resettable.
but this device (an Inductor) … impedes the rapid changes in the current.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This device then solves the entire problem.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
There are two important concepts here.
But it can get overloaded, and no longer works.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Here is a simplified AC power diagram.
but I think this circuit , shows a few more pieces.
It also is a device that limits the change in current flow.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–16 [ OO OLAOYE OYEBODE ]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
At least they know the answer if they wanted it.
At one ohm, the resistor has a maximum of 1 watt power.
One is “what exactly is in a ‘surge protector’ ? ”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
For this case there are devices called Metal oxide varistors (MOV).
a photo is worth a thousand words.
What does a fuse do?
So, the voltage could go up to 500 volts, and the fuse will not open up.
It seems Mohan does not understand the difference between a comment and an Answer.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
The other is “what does a “fuse” do?”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Because the load is inductive, the current lags the voltage.(by a bit).
This one hit behind the barn.
These devices are installed between the “hot” and “neutral” and protective ground.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What is lightning?
eight
First Sentence:
He then describes Rainy Season and Lightning.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
There are three different concepts here that are getting confused.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–10[John johnson John Johnson ]
Upvotes:
The bolt then partially travels down the line to your home.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.